产品中心
新闻动态 当前位置:首页>新闻动态>新闻动态

防撞墙模具的使用过程当中

网址:www.fzqmoju.com.cn  2022-06-21  作者:admin    阅读:

防撞墙模具的使用过程当中,我们应该在每次使用之前都对模具进行一个简单而有效的检查,以防模具出现了不正常的使用情况,从而导致制作出来的防撞墙并不符合使用要求,检查防撞墙模具的刃口情况,
In the process of using the anti-collision wall mold, we should conduct a simple and effective inspection on the mold before each use, in order to prevent the abnormal use of the mold, which leads to the anti-collision wall does not meet the use requirements. Check the cutting edge of the anti-collision wall mold,
如果是上一次用完之后没有磨过模具的刃口,那就必须在新一次使用之前先将刃口磨好,并且磨完之后不能马上进行使用,而是要先进行消磁处理,消磁之后再使用才不会发生堵料之类的问题
If the die edge has not been grinded after the last use, it must be grinded before the new use, and can not be used immediately after grinding, but must be degaussed first, and then used after degaussing, so as to avoid material blocking and other problems

返回新闻

联系电话
13313028229